176 Faxing
Sending a Fax
Loading an Original Document on the ADF
IMPORTANT:
• Do not load more than 15 sheets into the automatic document feeder (ADF) or allow more than 15 sheets to be fed to the
document output tray. The document output tray should be emptied before it exceeds 15 sheets or your original documents
may be damaged.
NOTE:
• To get the best scan quality, especially for gray scale images, use the document glass instead of the ADF.
• You cannot load the following documents in the ADF. Be sure to place them on the document glass.
1 Place the document(s) facing up on the ADF with the top edge of the documents in first. Then adjust the
document guides to the correct document size.
2 Adjust the document resolution, referring to "Resolution" on page 178.
Curled originals Pre-punched paper
Lightweight originals Folded, creased or torn originals
Cut and paste originals Carbon paper
To Next Page
Loading...
Need help?
General
