Fuji Xerox DocuPrint CM225FW User Manual

Using the Operator Panel Menus and Keypad 233
• Adjust Fusing Unit
Purpose:
To specify the optimum temperature settings for printing for the fusing unit. To lower the temperature, set negative
values. To increase, set positive values.
The default settings may not give the best output on all paper types. When the printed paper has curled, try to lower
the temperature. When the toner does not fuse on the paper properly, try to increase the temperature.
NOTE:
• The print quality changes depending on the values you select for this item.
Values:
• Auto Reg Adjust
Purpose:
To automatically start adjusting color registration.
Values:
• Color Registration
Purpose:
To manually perform color registration adjustment.
Manual color registration adjustments are required when the printer is initially installed and after the printer is moved.
Values:
Plain 0*
-3 – 3
Bond 0*
-3 – 3
Light Card 0*
-3 – 3
LW Gloss Card 0*
-3 – 3
Labels 0*
-3 – 3
Recycled 0*
-3 – 3
Envelope 0*
-3 – 3
Off Does not automatically adjust color registration.
On* Automatically adjusts color registration.
Auto
Registration
Start Automatically performs color registration correction.
Print
Registration
Chart
Print Prints a color registration chart. The color registration chart prints a lattice pattern
of yellow magenta, and cyan lines. On the chart, find the values on the right side
that are next to the line that is perfectly straight for each of the three colors. If the
value for this line is 0, color registration adjustment is not required.
If the value for this line is any value other than 0, specify the adjustment values
under lateral adjustment and process adjustment in Enter Registration
values.

Fuji Xerox DocuPrint CM225FW Specifications

General

Brand	Fuji Xerox
Model	DocuPrint CM225FW
Category	Printer
Language	English