Fuji Xerox DocuPrint CM225FW User Manual

48 Printer Connection and Software Installation
• For Mac OS X
1 Connect the printer to a wired network.
Refer to "Ethernet Connection" on page 51.
2 Set the printer's IP address.
• If DHCP is available on your network, refer to "Dynamic Methods of Setting the Printer's IP Address" on
page 56.
• You can also manually set the printer's IP address by using the operator panel. Refer to "Assigning an IP
Address Manually" on page 57.
3 Install the driver software on the computer from the Software Pack CD-ROM.
Refer to "Configuring Printer and Installing Software on Mac OS X" on page 83.
 Wireless Connection
• For Windows
1 Connect the printer to a wireless network.
Refer to "Wireless Connection" on page 52.
Perform the following steps as necessary.
If you set up wireless connection using the installer on the Software Pack CD-ROM, the following steps are not
necessary.
2 Set the printer's IP address.
• If DHCP is available on your network, refer to "Dynamic Methods of Setting the Printer's IP Address" on
page 56.
• You can also manually set the printer's IP address by using the operator panel. Refer to "Assigning an IP
Address Manually" on page 57.
3 Install the driver software on the computer from the Software Pack CD-ROM.
Refer to "Configuring Printer and Installing Software on Windows" on page 60.
• For Mac OS X
1 Connect the printer to a wireless network.
Refer to "Wireless Connection" on page 52.
2 Set the printer's IP address.
• If DHCP is available on your network, refer to "Dynamic Methods of Setting the Printer's IP Address" on
page 56.
• You can also manually set the printer's IP address by using the operator panel. Refer to "Assigning an IP
Address Manually" on page 57.
3 Install the driver software on the computer from the Software Pack CD-ROM.
Refer to "Configuring Printer and Installing Software on Mac OS X" on page 83.

Fuji Xerox DocuPrint CM225FW Specifications

General

Brand	Fuji Xerox
Model	DocuPrint CM225FW
Category	Printer
Language	English