182 Faxing
Sending a Delayed Fax
The Delayed Send mode can be used to save scanned documents for transmission at a specified time to take
advantage of lower long distance rates.
1 Load the document(s) facing up with top edge in first into the ADF or place a single document facing down on
the document glass and close the document cover.
See also:
• "Loading an Original Document on the ADF" on page 176
• "Loading an Original Document on the Document Glass" on page 177
2 Press the (Services Home) button.
3 Select Fax.
4 Adjust the document resolution to suit your fax needs.
See also:
• "Resolution" on page 178
• "Inserting a Pause" on page 179
5 Select the Options tab, and then select Delayed Send.
6 Select On.
7 Enter the start time using the number pad, and then select OK.
8 Select the Fax tab.
9 Enter the fax number of the recipient using the number pad.
You can also use speed or group dial numbers.
See also:
• "Automatic Dialing" on page 191
10 Press the (Start) button.
Once the Delayed Send mode is activated, your printer stores all the documents to be faxed to its memory
and sends them at the specified time. After faxing in the Delayed Send mode is complete, the data in the
memory will be cleared.
To Next Page
Loading...
Need help?
General
