Scanning 163
Scanning to a USB Storage Device
The Scan To USB feature allows you to scan documents and save the scanned data to a USB storage device. To
scan documents and save them, follow the steps below:
1 Load the top edge of document(s) first with facing up into the ADF or place a single document facing down on
the document glass and close the document cover.
See also:
• "Making Copies From the ADF" on page 130
• "Making Copies From the Document Glass" on page 128
2 Press the (Services Home) button.
3 Insert the USB storage device into the USB drive of the printer.
NOTE:
• If the USB Drive Detected menu appears, select Scan To USB, and proceed to step 6.
4 Select Scan To.
5 Select USB Memory.
6 Select scanning options as required. For details, see "Scan Defaults" on page 244.
You can also specify the folder to save the scanned image. For details, see "Specifying a Folder to Save the
Scanned Image" on page 164.
7 Press the (Start) button.
When you are using the document glass, the display prompts you for another page. Select Scan Another
Page or Done. Save Now.
If you want to place a new document, replace the document with a new document, and then select Scan
Another Page.
8 Remove the USB storage device from the printer.
IMPORTANT:
• Before removing the USB storage device, ensure that the printer is not accessing the USB storage device. If you remove
the USB storage device while the printer is accessing, the data in the USB storage device or the USB storage device
itself may be damaged.
To Next Page
Loading...
Need help?
General
