Fuji Xerox DocuPrint CM225FW User Manual

174 Faxing
Configuring Fax Initial Settings
NOTE:
• The following settings can be configured also using Fax Setup on the FX Printer Installation screen which is launched from
the Software Pack CD-ROM.
 Setting Your Region
You need to set the region where your printer is used for using the fax service on the printer.
1 Press the (System) button.
2 Select the Tools tab, and then select Admin Settings.
3 Select Fax Settings.
4 Select Fax Line Settings.
5 Select Region.
6 Select the region where the printer is used, and then select OK.
7 Select Yes, Save.
The printer restarts automatically to apply the settings.
NOTE:
• When you configure the region setting, the information, which is registered to the device, is initialized.
 Setting the Printer ID
You may be required to indicate your fax number on any fax you send. The printer ID, containing your telephone
number and name or company name, will be printed at the top of each page sent from your printer.
1 Press the (System) button.
2 Select the Tools tab, and then select Admin Settings.
3 Select Fax Settings.
4 Select Fax Line Settings.
5 Select Fax Number.
6 Enter your fax number using the number pad.
NOTE:
• If you make a mistake while entering numbers, press the C (Clear) button to delete the last digit.
7 Select OK when the number on the display is correct.
8 Select Company Name.
9 Enter your name or company name using the keyboard.
10 Select OK when the name on the display is correct.
To return to the top level of the System menu, press the (Clear All) button.

Fuji Xerox DocuPrint CM225FW Specifications

General

Brand	Fuji Xerox
Model	DocuPrint CM225FW
Category	Printer
Language	English