Fuji Xerox DocuPrint CM225FW User Manual

Troubleshooting 287
 Color Registration Is Out of Alignment
NOTE:
• If the problem continues even though you have taken suggested actions described above, contact the Fuji Xerox local
representative office or an authorized dealer.
Problem Action
Color registration is out of alignment. Execute an auto color registration adjustment.
1 Launch the Printer Setting Utility, and click Registration Adjustment on the
Printer Maintenance tab.
2 Deselect the check box next to On.
3 Click Start next to Auto Correct.
Clean the CTD sensor.
1 Clean the CTD sensor.
2 Launch the Printer Setting Utility, and click Registration Adjustment on the
Printer Maintenance tab.
3 Deselect the check box next to On.
4 Click Start next to Auto Correct.
See also:
• "Cleaning the Color Toner Density (CTD) Sensor" on page 323
Print the color registration chart and manually correct the color registration.
1 Launch the Printer Setting Utility, and click Registration Adjustment on the
Printer Maintenance tab.
2 Deselect the check box next to On.
3 Click Start next to Print Color Regi Chart.
The color registration chart is printed.
4 Check the values with the straight lines on the chart.
5 Select the value for each color on the Printer Setting Utility.
6 Click Apply New Settings.
7 Click Start next to Print Color Regi Chart to print the color registration chart
again.
8 Adjust until all straight lines are at the value of 0.
See also:
• "Adjusting Color Registration" on page 291

Fuji Xerox DocuPrint CM225FW Specifications

General

Brand	Fuji Xerox
Model	DocuPrint CM225FW
Category	Printer
Language	English