Using the Operator Panel Menus and Keypad 239
• PS Data Format
Purpose:
To specify the PostScript 3 Compatible communication protocol. You can configure the PS Data Format settings
for the wired network.
Values:
Defaults Settings
Use the Defaults Settings menu to configure the default copy, scan, and fax settings of the printer.
Copy Defaults
Use the Copy Defaults menus to configure a variety of copy features.
NOTE:
• The value marked by an asterisk (*) is the factory default setting.
• Output Color
Purpose:
To select color or black and white copying.
Values:
• Collation
Purpose:
To sort the copy job.
Values:
• Reduce / Enlarge
Purpose:
To set the default copy reduction/enlargement ratio.
Values:
mm series
Auto* Sets the PostScript 3 Compatible communications protocol automatically.
Standard Sets the PostScript 3 Compatible communications protocol to Standard.
BCP Sets the PostScript 3 Compatible communications protocol to BCP.
TBCP Sets the PostScript 3 Compatible communications protocol to TBCP.
Full Color* Copies in color mode.
Black & White Copies in black and white mode.
Uncollated* Does not sort the copy job.
Collated Sorts the copy job.
100%*
50%
70%
A4A5
84%
B5A5
118%
A5B5
To Next Page
Loading...
Need help?
General
