1.2 Configuration
1-13
3. Applicable model: FAR-2137S, 2837S and 2137S-BB
Table 1.2.4 Configuration of 30 kW S-band Type Radar
Transceiver Gear box Radiator
Model
Type Output Type Motor rpm
Motor
power
PM De-icer
Type
(Length)
21
200 VAC
3 Ph. 50 Hz
RSB-098 RM7398
26
220 VAC
3 Ph. 60 Hz
21
380 VAC
3 Ph. 50 Hz
RSB-099 RM7435
26
440 VAC
3 Ph. 60 Hz
RSB-100 RM-9519
220 VAC
3 Ph. 50 Hz
RSB-101 RM-9520
220 VAC
3 Ph. 60 Hz
FAR
-2137S
-2837S
-2137S-BB
RTR-080 30 kW
RSB-102 RM-9521
45
440 VAC
3 Ph. 60 Hz
PM-51 Yes
SN-36AF
(12 ft)
SN-30AF
(10 ft)
The De-icer must be incorporated in the factory. (not the field job)
The performance monitor (PM-51) is built in the Gearbox. The PM-51 can be mounted
in the field job. The antenna revolution speed depends on the type of the Gearbox.
Use a transformer unit when the specifications of Antenna motor power are different
from ship’s power supply.
The Antenna motor power is supplied to the Gearbox via the Power supply unit,
PSU-007. The PSU-007 is composed of Relays and Thermal switches.
A note should be taken that an Antenna radiator; SN-30AF (10 ft) of 21/26 rpm does not
adapt with the IMO radar in terms of the bearing discrimination. However, the HSC is
adapted.
Fig. 1.2.8 Configuration of PSU-007
3IN
3 OUT
Motor ON
+12V
RPU-013
Relay
Thermar
relay
PSU-007
J604
TB1
K2
K1
Ship’s Main
RU-xxxx
SCANNER UNIT
ote:
Set the operating current of the
Thermal relay according to the
type of the Antenna motor.
To Next Page
Loading...
Need help?
General
