Furuno FAR-2827 Service Manual

3.3 Main Menu Tree
3-35
2. Initialize menu
To access the Initialize Menu, press the [MENU] key five times while pressing the [1: HL
OFF] key.
Table 3.3.3 Default Setting Menu
Main Menu Submenu (1) Submenu (2) Submenu (3) Type
1 BACK
1 BACK
2 CABLE ATT ADJ AUTO/MANUAL 30 (0-73)
3 HD ALIGN
000.0
(0-359.9)
4 TIMMING ADJ
1
(0-4095)
5 MBS
0
(0-255)
6 DEFAULT
ANT HIGHT
5/7.5/10/15/20/25/
30/35/40/45/
more 50 m
7 NEAR STC CRVE 2/2.5/3/3.5
8 MID STC CRVE 3/4/5/6
9 FAR STC CRVE 6/7/8
2 [ECHO ADJ]
0 RING SUPPRESSION
1
(0-255)
All
1 BACK
START 000°
2 BLIND SECTOR 1
ANGLE 000°
START 000°
3 BLIND SECTOR 2
ANGLE 000°
4 ANT REVOLUTION LO/HI/AUTO
5 ANT SW OFF/ON
3 [SCANNER]
6 ANT STOPPED
STBY/TX
All
1 BACK
2 RADAR MAIN/SUB
All
3.RANGE UNIT NM/SM/km/kyd
IMO/A
Not
available
4 RADAR NO 1/2/3/4/5/6/7/8
4 [INSTALL-
ATION]
5 RADAR POSN
FORE/MAINTOP/
MAIN 2ND/
MAIN 3RD/AFT/
PORT/STAR BOAD
Cont’d

Furuno FAR-2827 Specifications

General

Brand	Furuno
Model	FAR-2827
Category	Marine Radar
Language	English