Furuno FAR-2827 Service Manual

1.2 Configuration
1-15
4. Applicable model: FAR-2837SW
Table 1.2.6 Configuration of 30 kW Waveguide Type S-band Radar
Transceiver Gear box Radiator
Model
Type Output Type Motor rpm PM De-icer
Type
(Length)
RM-7398
(200 VAC/3 Ph/50 Hz)
21
RSB-104
RM-7398
(220 VAC/3 Ph/60 Hz)
26
RM-7435
(380 VAC/3 Ph/50 Hz)
21
FAR
-2837SW
RTR-082 30 kW
RSB-105
RM-7435
(440 VAC/3 Ph/60 Hz)
26
PM-51 Yes
SN-30AF
(10 ft)
SN-36AF
(12 ft)
As for the description on the De-icer and Performance monitor; PM-51, the same as
given in the above clause “3. FAR-2x37S” is applied. The Gearbox and Transceiver unit;
RTR-082 are connected by a waveguide. Install the Transceiver unit in such a way as to
minimize the length of the waveguide for minimizing the loss of the waveguide. And, it
has to keep more than specified bent radius because the loss becomes greater.
Fig. 1.2.10 Configuration of 30 kW S-band Waveguide Type Radar
FURUNO
LHPX-20D-ASSY
Scanner
RPU-013
100VAC 1 50/60Hz
100/110/200/220VAC
1 50/60Hz
RU-3305
For De-Icer
(Transformer)
110VAC 3 60Hz
200VAC 3 50Hz
220VAC 3 60Hz
380VAC 3 50Hz
440VAC 3 60Hz
220VAC 3 50Hz
440VAC 3 50Hz
RU-5693
RU-6522
RU-5466-1
(Transformer)
(Transformer)
(Transformer)
220VAC
200VAC
200VAC
T/R unit
RTR-082
For ANT motor power supply
RW-9600
MPYCY-12(Cont)
TPYCY-2.5(Motor)
TPYCY-2.5
DPYCY-1.5
Length of waveguide:
Recommended dimension is less than 30 m.
Specifications of bend radius for
LHPX-20D
- Bend radius (single): more than R150 mm
- Bend radius (repeated): more than R250 mm

Furuno FAR-2827 Specifications

General

Brand	Furuno
Model	FAR-2827
Category	Marine Radar
Language	English