Furuno FAR-2827 Service Manual

4.16 Sub Monitor
4-82
2. Timing adjustment
Do the timing adjustments of slave display by [Menu] -> 0 -> 2 -> 4:TIMING ADJ. See
page.4-14 for adjustments.
3. Switching for the sub monitor
To display Full-log or Semi-log video signals inputted from the Master port [J616]:
- B ,C and W types,
Set “8. SUB MONITOR” to ON by clicking [ANT INF] box. You can switch
the setting between “ANT-x” and “SUB”.
- In case of IMO and A types:
Set [MENU] -> 0 -> 2:RADAR to “SUB”.
Note:
See page.4-20 for the details for operations when the setting is switched to the sub
monitor.

Furuno FAR-2827 Specifications

General

Brand	Furuno
Model	FAR-2827
Category	Marine Radar
Language	English