om 5184516-100 Rev. 5 5-54
3-3User Preferences
Below the Utilities tab and within the Preferences tab the screen below appears:
ILLUSTRATION 5-54
USER PREFERENCE SCREEN
The user has the ability to set the default values for all the functions listed.
The values set at this screen are used within the Patient Select, Acquire and
View/Film screens.
3-3-1 Default Dose - Fl/Rec
The default dose can be set to either Pediatric or Adult - this setting is used each
time a digital record exam is started. The user can also change the dose during
the exam at either the IUI or at the IDD console.
3-3-2 Default Pediatric Grid
The default grid position can be configured to be in or out when the Pediatric dose
is selected. The user can also change the grid position during the exam at the
IDD console.
3-3-3 DSA Image Invert
DSA Image Invert can be set to W/B or B/W (White on Black, Black on White).
When performing DSA acquisition images will be acquired and displayed at the
default setting.
FOR TRAINING PURPOSES ONLY!
NOTE: Once downloaded, this document is UNCONTROLLED, and therefore may not be the latest revision. Always confirm revision status against a validated source (ie CDL).
To Next Page
Loading...
Need help?
General
