om 5184516-100 Rev. 5 5-31
To change position of a category, select the drop down menu and select the Pro-
tocol category to be moved. A Protocol category can be positioned first or at any
other position within the complete list of Protocol categories.
NOTE: It is necessary to SAVE after changes have been made. Select OK will tem-
porarily save the changes made. Upon exiting from Protocol Editor, a final
save or cancel confirmation will ensure any changes made will be saved.
Delete Category When Delete Category is selected a pop–up window appears as shown below:
ILLUSTRATION 5-30
DELETE CATEGORY
The name of the currently selected Protocol Category appears.
3-2-4 Protocols
Only one Protocol is able to be selected at a time. When the user selects a Proto-
col, the new Protocol button depresses. If a Protocol had been selected prior to
the new Protocol being selected, the original Protocol button is released. This
behavior is different from the Select Protocols screen where multiple Protocols
can be selected simultaneously. The Protocol selections are greyed out/inactive
until a Protocol is selected.
FOR TRAINING PURPOSES ONLY!
NOTE: Once downloaded, this document is UNCONTROLLED, and therefore may not be the latest revision. Always confirm revision status against a validated source (ie CDL).
To Next Page
Loading...
Need help?
General
