101
Use undo igmp timer query to restore the default.
By default, the IGMP general query interval is 60 seconds.
Related commands: display igmp interface, igmp timer other-querier-present, and timer query.
Examples
# Set the IGMP general query interval to 125 seconds on VLAN-interface 100.
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] igmp timer query 125
igmp version
Syntax
igmp version version-number
undo igmp version
View
Interface view
Default level
2: System level
Parameters
version-number: IGMP version, in the range of 1 to 3.
Description
Use igmp version to configure the IGMP version on the current interface.
Use undo igmp version to restore the default IGMP version.
The default IGMP version is version 2.
Related commands: version.
Examples
# Set the IGMP version to IGMPv1 on VLAN-interface 100.
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] igmp version 1
last-member-query-interval (IGMP view)
Syntax
last-member-query-interval interval
undo last-member-query-interval
View
Public network IGMP view, VPN instance IGMP view
To Next Page
Loading...
Need help?
General