72
Field Descri
tion
Version1-host-present-timer-expiry
Remaining time of the IGMPv1 host present timer, where "off"
means that the timer never expires.
Version2-host-present-timer-expiry
Remaining time of the IGMPv2 host present timer, where "off"
means that the timer never expires.
This field is displayed only when the switch is running IGMPv3.
display igmp group port-info
Syntax
display igmp group port-info [ vlan vlan-id ] [ slot slot-number ] [ verbose ] [ | { begin | exclude |
include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
vlan-id: VLAN ID, in the range of 1 to 4094. If you do not specify a VLAN, this command displays the
Layer 2 port information of IGMP groups in all VLANs.
slot slot-number: Displays the Layer 2 port information of IGMP multicast groups on the specified IRF
member switch. The slot-number argument specifies the ID of an IRF member switch. The value range for
the argument depends on the number of member switches and their member IDs in the IRF fabric. If no
IRF fabric exists, the slot-number argument is the current device number.
verbose: Displays the detailed information about Layer 2 ports of IGMP groups.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display igmp group port-info to display Layer 2 port information of IGMP groups, including both
dynamic and static Layer 2 port entries.
Examples
# Display detailed Layer 2 port information of IGMP groups.
<Sysname> display igmp group port-info verbose
Total 1 IP Group(s).
Total 1 IP Source(s).
Total 1 MAC Group(s).
Port flags: D-Dynamic port, S-Static port, C-Copy port
Subvlan flags: R-Real VLAN, C-Copy VLAN