225
Network From Reuse Path/Origin
*d 77.0.0.0 12.1.1.1 00:29:20 100?
Table 51 Command output
Field Descri
tion
From IP address from which the route was received
Reuse Reuse time of the route
For more information about the output, see Table 50.
display bgp multicast routing-table dampening parameter
Syntax
display bgp multicast routing-table dampening parameter [ | { begin | exclude | include }
regular-expression ]
View
Any view
Default level
2: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display bgp multicast routing-table dampening parameter to display IPv4 MBGP route dampening
parameters.
Related commands: dampening.
Examples
# Display IPv4 MBGP route dampening parameters.
<Sysname> display bgp multicast routing-table dampening parameter
Maximum Suppress Time(in second) : 3069
Ceiling Value : 16000
Reuse Value : 750
Reach HalfLife Time(in second) : 900
Unreach HalfLife Time(in second): 900
Suppress-Limit : 2000
To Next Page
Loading...
Need help?
General