348
[Sysname] mld
[Sysname-mld] ssm-mapping ff1e:: 64 1::1
startup-query-count (MLD view)
Syntax
startup-query-count value
undo startup-query-count
View
MLD view
Default level
2: System level
Parameters
value: Specifies a startup query count, namely, the number of queries that the MLD querier sends on
startup, in the range of 2 to 5.
Description
Use startup-query-count to configure the startup query count globally.
Use undo startup-query-count to restore the default.
By default, the startup query count is set to the MLD querier’s robustness variable.
Related commands: mld startup-query-count and robust-count.
Examples
# Set the startup query count to 3 globally.
<Sysname> system-view
[Sysname] mld
[Sysname-mld] startup-query-count 3
startup-query-interval (MLD view)
Syntax
startup-query-interval interval
undo startup-query-interval
View
MLD view
Default level
2: System level
Parameters
interval: Specifies a startup query interval in seconds, namely, the interval between general queries that
the MLD querier sends on startup, in the range of 1 to 18000.
Description
Use startup-query-interval to configure the startup query interval globally.
To Next Page
Loading...
Need help?
General