320
Field Descri
tion
Other-querier-present-timer-expiry
Remaining time of MLD other querier present timer, where "off"
means that the timer never times out
Proxying interface
MLD proxy interface, where "none" means that no proxy
interface exists
Total 1 MLD Group reported
Total number of MLD groups the interface has dynamically
joined
Version1-querier-present-timer-expiry
Remaining time of the MLDv1 querier present timer, where "off"
means that the timer never times out
display mld proxying group
Syntax
display mld proxying group [ ipv6-group-address ] [ verbose ] [ | { begin | exclude | include }
regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
ipv6-group-address: Displays the information of the specified MLD proxying group. The group address is
in the form of FFxy::/16 (excluding FFx0::/16, FFx1::/16, FFx2::/16, through FF0y::), where x and y
represent any hexadecimal number ranging from 0 to F. If this argument is not specified, this command
displays the information of all the MLD proxying groups.
verbose: Displays detailed MLD proxying group information.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display mld proxying group to display MLD proxying group information.
Examples
# Display MLD proxying group information on all interfaces.
<Sysname> display mld proxying group verbose
Proxying group record(s) information
Total 1 MLD-Proxying group record(s)
Group: FF03::101
Group mode: include
Member state: Delay
To Next Page
Loading...
Need help?
General