153
Description
Use pim bfd enable to enable PIM to work with Bidirectional Forwarding Detection (BFD).
Use undo pim bfd enable to disable this feature.
By default, this feature is disabled.
You must enable PIM-DM or PIM-SM on an interface before you configure this feature on the interface.
Otherwise, this feature is not effective.
Related commands: pim dm and pim sm.
Examples
# Enable IP multicast routing in the public network, enable PIM-SM on interface VLAN-interface 100, and
enable PIM to work with BFD on the interface.
<Sysname> system-view
[Sysname] multicast routing-enable
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] pim sm
[Sysname-Vlan-interface100] pim bfd enable
pim bsr-boundary
Syntax
pim bsr-boundary
undo pim bsr-boundary
View
Interface view
Default level
2: System level
Parameters
None
Description
Use pim bsr-boundary to configure a PIM domain border, namely, a bootstrap message boundary.
Use undo pim bsr-boundary to remove the configured PIM domain border.
By default, no PIM domain border is configured.
Related commands: c-bsr and multicast boundary.
Examples
# Configure VLAN-interface 100 as a PIM domain border.
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] pim bsr-boundary
To Next Page
Loading...
Need help?
General