313
Examples
# Display detailed information about dynamically joined MLD groups on all interfaces.
<Sysname> display mld group verbose
Interface group report information
Vlan-interface1(FE80::101)
Total 1 MLD Groups reported
Group: FF03::101
Uptime: 00:01:46
Expires: 00:01:30
Last reporter: FE80::10
Last-listener-query-counter: 0
Last-listener-query-timer-expiry: off
Group mode: include
Version1-host-present-timer-expiry: off
Table 68 Command output
Field Descri
tion
Interface group report information
MLD group information on the interface.
Total 1 MLD Groups reported One MLD group was reported.
Group IPv6 multicast group address.
Uptime
Length of time since the IPV6 multicast group was joined.
Expires
Remaining time of the IPv6 multicast group, where "off" means that
the multicast group never times out.
Last reporter
IPv6 address of the host that last reported membership for this
group.
Last-listener-query-counter
Number of MLD last listener queries sent.
Last-listener-query-timer-expiry
Remaining time of the MLD last listener query timer, where "off"
means that the timer never times out.
Group mode
Multicast source filtering mode:
• Include.
• Exclude.
This field is displayed only when the device is running MLDv2.
Version1-host-present-timer-expiry
Remaining time of the MLDv1 host present timer, where "off" means
that the timer never times out.
This field is displayed only when the device is running MLDv2.
display mld group port-info
Syntax
display mld group port-info [ vlan vlan-id ] [ slot slot-number ] [ verbose ] [ | { begin | exclude | include }
regular-expression ]
View
Any view