HP 3600 v2 Series User Manual

436
Examples
# Redistribute routes from RIPng 1.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv6-family multicast
[Sysname-bgp-af-ipv6-mul] import-route ripng 1
ipv6-family multicast
Syntax
ipv6-family multicast
undo ipv6-family multicast
View
BGP view
Default level
2: System level
Parameters
None
Description
Use ipv6-family multicast to enter IPv6 MBGP address family view.
Use undo ipv6-family multicast to remove all the configurations in the IPv6 MBGP address family view.
IPv4 BGP unicast view is the default.
If the ipv6-family command is not configured in BGP view, you cannot directly configure the ipv6-family
multicast command in BGP view (see example I). If the ipv6-family command is configured in BGP view,
you can directly configure the ipv6-family multicast command in BGP view (see example II).
Examples
• Example I
# Enter IPv6 MBGP address family view.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv6-family multicast
Error: Please configure IPv6 Unicast address-family first
The error information indicates that the ipv6-family command is not configured.
[Sysname-bgp] ipv6-family
[Sysname-bgp-af-ipv6] quit
[Sysname-bgp] ipv6-family multicast
[Sysname-bgp-af-ipv6-mul]
• Example II
# Enter IPv6 MBGP address family view.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv6-family multicast

HP 3600 v2 Series Specifications

General

Brand	HP
Model	3600 v2 Series
Category	Switch
Language	English