226
Table 52 Command output
Field Descri
tion
Maximum Suppress Time Maximum suppression time
Ceiling Value Ceiling penalty value
Reuse Value Reuse value
HalfLife Time Half-life time of active routes
Suppress-Limit Threshold at which a route is suppressed
display bgp multicast routing-table different-origin-as
Syntax
display bgp multicast routing-table different-origin-as [ | { begin | exclude | include }
regular-expression ]
View
Any view
Default level
2: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display bgp multicast routing-table different-origin-as to display the IPv4 MBGP routes that
originate from different autonomous systems.
Examples
# Display the IPv4 MBGP routes that originate from different autonomous systems.
<Sysname> display bgp multicast routing-table different-origin-as
BGP Local router ID is 2.2.2.2
Status codes: * - valid, ^ - VPNv4 best, > - best, d - damped,
h - history, i - internal, s - suppressed, S - Stale
Origin : i - IGP, e - EGP, ? - incomplete
Network NextHop MED LocPrf PrefVal Path/Ogn
*> 55.0.0.0 12.1.1.1 0 0 100?
* 14.1.1.2 0 0 300?
To Next Page
Loading...
Need help?
General