50
display multicast boundary
Syntax
display multicast [ all-instance | vpn-instance vpn-instance-name ] boundary [ group-address [ mask |
mask-length ] ] [ interface interface-type interface-number ] [ | { begin | exclude | include }
regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
all-instance: Specifies all VPN instances.
vpn-instance vpn-instance-name: Specifies a VPN by its name, a case-sensitive string of 1 to 31
characters.
group-address: Specifies a multicast group address, in the range of 224.0.0.0 to 239.255.255.255.
mask: Specifies the mask of the multicast group address, 255.255.255.255 by default.
mask-length: Specifies the mask length of the multicast group address, in the range of 4 to 32. The default
is 32.
interface-type interface-number: Specifies an interface by its type and number.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display multicast boundary to display multicast boundary information on the specified interface or
all interfaces.
If neither all-instance nor vpn-instance is specified, this command displays multicast boundary
information on the public network.
Related commands: multicast boundary.
Examples
# Display multicast boundary information on all interfaces on the public network.
<Sysname> display multicast boundary
Multicast boundary information of VPN-Instance: public net
Boundary Interface
224.1.1.0/24 Vlan1
239.2.2.0/24 Vlan2
To Next Page
Loading...
Need help?
General