167
reset pim control-message counters
Syntax
reset pim [ all-instance | vpn-instance vpn-instance-name ] control-message counters [ interface
interface-type interface-number ]
View
User view
Default level
1: Monitor level
Parameters
all-instance: Specifies all VPN instances.
vpn-instance vpn-instance-name: Specifies a VPN, where vpn-instance-name is a case-sensitive string of
1 to 31 characters.
interface interface-type interface-number: Resets the PIM control message counter on a particular
interface. If no interface is specified, this command resets PIM control message counters on all interfaces.
Description
Use reset pim control-message counters to clear statistics for PIM control messages.
If neither all-instance nor vpn-instance is specified, this command clear statistics for PIM control
messages onthe public network.
Examples
# Clear statistics for PIM control messages on all interfaces on the public network.
<Sysname> reset pim control-message counters
source-lifetime (PIM view)
Syntax
source-lifetime interval
undo source-lifetime
View
Public network PIM view, VPN instance PIM view
Default level
2: System level
Parameters
interval: Multicast source lifetime in seconds, with an effective range of 1 to 31,536,000.
Description
Use source-lifetime to configure the multicast source lifetime.
Use undo source-lifetime to restore the default.
By default, the lifetime of a multicast source is 210 seconds.
To Next Page
Loading...
Need help?
General