189
<Sysname> system-view
[Sysname] msdp vpn-instance mvpn
[Sysname-msdp-mvpn] peer 125.10.7.6 description CustomerA
peer mesh-group
Syntax
peer peer-address mesh-group name
undo peer peer-address mesh-group
View
Public network MSDP view, VPN instance MSDP view
Default level
2: System level
Parameters
peer-address: Specifies an MSDP peer address.
name: Specifies a mesh group name, a case-sensitive string of 1 to 32 characters. A mesh group name
must not contain any space.
Description
Use peer mesh-group to configure an MSDP peer as a mesh group member.
Use undo peer mesh-group to remove an MSDP peer as a mesh group member.
By default, an MSDP peer does not belong to any mesh group.
Examples
# On the public network, configure the MSDP peer with the IP address of 125.10.7.6 as a member of the
mesh group "Group1".
<Sysname> system-view
[Sysname] msdp
[Sysname-msdp] peer 125.10.7.6 mesh-group Group1
# In VPN instance mvpn, configure the MSDP peer with the IP address of 125.10.7.6 as a member of the
mesh group "Group1."
<Sysname> system-view
[Sysname] msdp vpn-instance mvpn
[Sysname-msdp-mvpn] peer 125.10.7.6 mesh-group Group1
peer minimum-ttl
Syntax
peer peer-address minimum-ttl ttl-value
undo peer peer-address minimum-ttl
View
Public network MSDP view, VPN instance MSDP view
To Next Page
Loading...
Need help?
General