105
Default level
2: System level
Parameters
all: Specifies all the IGMP groups.
group-address: Specifies an IGMP group. group-address is in the range of 224.0.1.0 to
239.255.255.255.
vlan-id: Specifies a VLAN. vlan-id is in the range 1 to 4094.
Description
Use reset igmp group port-info to remove dynamic Layer 2 port entries for IGMP groups.
Layer 2 ports for IGMP groups include member ports and router ports.
This command cannot remove static Layer 2 port entries of IGMP groups.
Related commands: display igmp group port-info.
Examples
# Remove the dynamic Layer 2 port entries for all IGMP groups in all VLANs.
<Sysname> reset igmp group port-info all
# Remove the dynamic Layer 2 port entries for all IGMP groups in VLAN 100.
<Sysname> reset igmp group port-info all vlan 100
# Remove the dynamic Layer 2 port entry for the multicast group 225.0.0.1 in VLAN 100.
<Sysname> reset igmp group port-info 225.0.0.1 vlan 100
reset igmp ssm-mapping group
Syntax
reset igmp [ all-instance | vpn-instance vpn-instance-name ] ssm-mapping group { all | interface
interface-type interface-number { all | group-address [ mask { mask | mask-length } ] [ source-address
[ mask { mask | mask-length } ] ] } }
View
User view
Default level
2: System level
Parameters
all-instance: Specifies all VPN instances.
vpn-instance vpn-instance-name: Specifies a VPN, where vpn-instance-name is a case-sensitive string of
1 to 31 characters.
all: Specifies the multicast group information created based on the configured IGMP SSM mappings on
all interfaces (the first all), or all multicast group information created based on the configured IGMP SSM
mappings (the second all).
interface-type interface-number: Specifies an interface by its type and number.
group-address: Specifies a multicast group by its IP address, in the range of 224.0.0.0 to
239.255.255.255.
To Next Page
Loading...
Need help?
General