EasyManuals Logo
Home>HP>Switch>3600 v2 Series

HP 3600 v2 Series User Manual

HP 3600 v2 Series
479 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #138 background imageLoading...
Page #138 background image
125
crp-policy (PIM view)
Syntax
crp-policy acl-number
undo crp-policy
View
Public network PIM view, VPN instance PIM view
Default level
2: System level
Parameters
acl-number: Advanced ACL number, in the range of 3000 to 3999. When the ACL is defined, the source
keyword in the rule command specifies the address of a C-RP, and the destination keyword specifies the
address range of the multicast groups to which the C-RP is designated.
Description
Use crp-policy to configure a legal C-RP address range and the range of multicast groups to which the
C-RP is designated, in order to guard against C-RP spoofing.
Use undo crp-policy to remove the restrictions in C-RP address ranges and the ranges of multicast groups
to which the C-RP is designated.
By default, no restrictions are defined for C-RP address ranges and the address ranges of groups to which
the C-RP is designated. All received C-RP messages are accepted.
The crp-policy command filters the multicast group ranges advertised by C-RPs based on the group
prefixes. For example, if the multicast group range that a C-RP advertises is 224.1.0.0/16 and the legal
group range that the crp-policy command defines is 224.1.0.0/30, the multicast groups in the range of
224.1.0.0/16 can pass.
Related commands: c-rp.
Examples
# In the public network, configure a C-RP policy so that only devices in the address range of 1.1.1.1/24
can be C-RPs that provide services for multicast groups in the address range of 225.1.1.0/24.
<Sysname> system-view
[Sysname] acl number 3000
[Sysname-acl-adv-3000] rule permit ip source 1.1.1.1 0.0.0.255 destination 225.1.1.0
0.0.0.255
[Sysname-acl-adv-3000] quit
[Sysname] pim
[Sysname-pim] crp-policy 3000
# In VPN instance mvpn, configure a C-RP policy, so that only devices in the address range of 1.1.1.1/24
can be C-RPs that provide services for multicast groups in the address range of 225.1.1.0/24.
<Sysname> system-view
[Sysname] acl number 3000
[Sysname-acl-adv-3000] rule permit ip source 1.1.1.1 0.0.0.255 destination 225.1.1.0
0.0.0.255
[Sysname-acl-adv-3000] quit
[Sysname] pim vpn-instance mvpn

Table of Contents

Other manuals for HP 3600 v2 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP 3600 v2 Series and is the answer not in the manual?

HP 3600 v2 Series Specifications

General IconGeneral
BrandHP
Model3600 v2 Series
CategorySwitch
LanguageEnglish

Related product manuals