64
View
System view, VPN instance view
Default level
2: System level
Parameters
limit: Specifies the maximum number of downstream nodes (the maximum number of outgoing interfaces)
for a single multicast forwarding entry. The value ranges from 0 to 128.
Description
Use multicast forwarding-table downstream-limit to configure the maximum number of downstream
nodes for a single entry in the multicast forwarding table.
Use undo multicast forwarding-table downstream-limit to restore the default.
By default, the maximum number of downstream nodes for a single multicast forwarding entry is 128.
Related commands: display multicast forwarding-table.
Examples
# Set the maximum number of downstream nodes for a single multicast forwarding entry on the public
network to 120.
<Sysname> system-view
[Sysname] multicast forwarding-table downstream-limit 120
# Set the maximum number of downstream nodes for a single multicast forwarding entry of VPN instance
mvpn to 60.
<Sysname> system-view
[Sysname] ip vpn-instance mvpn
[Sysname-vpn-instance-mvpn] multicast forwarding-table downstream-limit 60
multicast forwarding-table route-limit
Syntax
multicast forwarding-table route-limit limit
undo multicast forwarding-table route-limit
View
System view, VPN instance view
Default level
2: System level
Parameters
limit: Specifies the maximum number of entries in the multicast forwarding table. The value ranges from
0 to 2000.
To Next Page
Loading...
Need help?
General