HP 3600 v2 Series User Manual

372
Field Descri
p
tion
Uptime Length of time since the IPv6 PIM neighbor was discovered.
Expires/Expiry time
Remaining time of the IPv6 PIM neighbor. "Never" means that the
IPv6 PIM neighbor is always up and reachable.
Dr-Priority/DR Priority Priority of the IPv6 PIM neighbor.
Mode
Mode of the IPv6 PIM neighbor, where B means IPv6 BIDIR-PIM
mode, and if nothing is displayed, it means non-IPv6 BIDIR-PIM
mode.
Generation ID
Generation ID of the IPv6 PIM neighbor. (A random value that
indicates status change of the IPv6 PIM neighbor.)
Holdtime
Hold time of the IPv6 PIM neighbor; "forever" means that the IPv6
PIM neighbor is always up and reachable.
LAN delay Prune message delay.
Override interval Prune override interval.
State refresh interval
Interval for sending state refresh messages.
Displayed only when the IPv6 PIM neighbor works in IPv6 PIM_DM
mode and state refresh capability is enabled.
Neighbor tracking Neighbor tracking status (enabled/disabled).
Bidirectional PIM IPv6 BIDIR-PIM status (enabled/disabled).
Neighbor Secondary Address(es)
Secondary IPv6 address of the PIM neighbor (non-link-local
address).
display pim ipv6 routing-table
Syntax
display pim ipv6 routing-table [ ipv6-group-address [ prefix-length ] | ipv6-source-address
[ prefix-length ] | incoming-interface [ interface-type interface-number | register ] | outgoing-interface
{ include | exclude | match } { interface-type interface-number | register } | mode mode-type | flags
flag-value | fsm ] * [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
ipv6-group-address: Specifies an IPv6 multicast group by its address, in the range of FFxy::/16, where
x and y represent any hexadecimal number between 0 and F, inclusive.
ipv6-source-address: Specifies an IPv6 multicast source by its IPv6 address.
prefix-length: Specifies the prefix length of the IPv6 multicast group/source address prefix. For an IPv6
multicast group address, the effective range is 8 to 128 and the default value is 128. For an IPv6 multicast
source address, the effective range is 0 to 128 and the default value is 128.

HP 3600 v2 Series Specifications

General

Brand	HP
Model	3600 v2 Series
Category	Switch
Language	English