HP 3600 v2 Series User Manual

321
Expires: 00:00:02
Source list (total 1 source(s))
Source: 30::1
Table 73 Command output
Field Descri
p
tion
Proxying group record(s) information Information of MLD proxying groups on the interfaces.
Total 1 MLD-Proxying group record(s) One MLD proxying group is recorded.
Group IPv6 multicast group address.
Member state
State of the member hosts:
• Delay.
• Idle.
Expires
Remaining time of the IPv6 multicast group, where
"off" means that the group never times out.
Group mode
IPv6 multicast source filtering modes:
• Include.
• Exclude.
Source list
List of IPv6 multicast sources (only including the
sources from which the hosts want to receive IPv6
multicast data).
display mld routing-table
Syntax
display mld routing-table [ ipv6-source-address [ prefix-length ] | ipv6-group-address [ prefix-length ] |
flags { act | suc } ] * [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
ipv6-source-address: Specifies a multicast source by its IPv6 address.
ipv6-group-address: Specifies an IPv6 multicast group by its IPv6 address, in the form of FFxy::/16,
where x and y represent any hexadecimal number ranging from 0 to F.
prefix-length: Prefix length of the multicast source or multicast group address. For a multicast source
address, this argument has an effective value range of 0 to 128. For a multicast group address, it has an
effective value range of 8 to 128. The default is 128 in both cases.
flags: Specifies the route flag.
act: Specifies the MLD routes with the ACT flag
suc: Specifies the MLD routes with the SUC flag.

HP 3600 v2 Series Specifications

General

Brand	HP
Model	3600 v2 Series
Category	Switch
Language	English