HP 3600 v2 Series User Manual

369
Field Descri
p
tion
PIM neighbor tracking (configured)
Configured neighbor tracking status
(enabled/disabled)
PIM generation ID Generation_ID value
PIM require generation ID
Rejection of hello messages without Generation_ID
(enabled/disabled)
PIM hello hold interval IPv6 PIM neighbor timeout time.
PIM assert hold interval Assert timeout time.
PIM triggered hello delay Maximum delay of sending hello messages.
PIM J/P interval Join/prune interval.
PIM J/P hold interval Join/prune timeout time.
PIM BSR domain border
Status of PIM domain border configuration
(enabled/disabled).
Number of routers on network not using DR priority
Number of routers not using the DR priority field on the
subnet where the interface resides.
Number of routers on network not using LAN delay
Number of routers not using the LAN delay field on the
subnet where the interface resides.
Number of routers on network not using neighbor
tracking
Number of routers not using neighbor tracking on the
subnet where the interface resides.
display pim ipv6 join-prune
Syntax
display pim ipv6 join-prune mode { sm [ flags flag-value ] | ssm } [ interface interface-type
interface-number | neighbor ipv6-neighbor-address ] * [ verbose ] [ | { begin | exclude | include }
regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
mode: Displays the information of join/prune messages to send in the specified IPv6 PIM mode. IPv6 PIM
modes include sm and ssm, which represent IPv6 PIM-SM and IPv6 PIM-SSM respectively.
flags flag-value: Displays IPv6 PIM routing entries that contain the specified flags. Values and meanings
of flag-value are as follows:
• rpt: Specifies routing entries on the RPT.
• spt: Specifies routing entries on the SPT.
• wc: Specifies wildcard routing entries.
interface-type interface-number: Displays the information of join/prune messages to send on the
specified interface.

HP 3600 v2 Series Specifications

General

Brand	HP
Model	3600 v2 Series
Category	Switch
Language	English