HP 3600 v2 Series User Manual

303
Field Descri
p
tion
Total 1 RP matched Total number of matched RPs.
00001 Sequence number of the RP.
MID ID of the RP. Each RP has a unique MID.
Flags
Current state of the RP. Different bits indicate different states of an RP.
Major values of the flags field before the colon are described in Table
64. The value
of the flags field after the colon is 0.
Uptime
Length of time for which the RP has been up, in the format
hours:minutes:seconds.
RPF interface RPF interface to the RP.
List of 1 DF interfaces DF interface list.
display multicast ipv6 routing-table
Syntax
display multicast ipv6 routing-table [ ipv6-source-address [ prefix-length ] | ipv6-group-address
[ prefix-length ] | incoming-interface { interface-type interface-number | register } | outgoing-interface
{ exclude | include | match } { interface-type interface-number | register } ] * [ | { begin | exclude |
include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
ipv6-source-address: Specifies a multicast source address.
ipv6-group-address: Specifies an IPv6 multicast group address, in the range of FFxy::/16, where x and
y represent any hexadecimal number from 0 through F.
prefix-length: Specifies the length of the prefix of a multicast group address or an IPv6 multicast source
address. For an IPv6 multicast group address, the value ranges from 8 to 128. For an IPv6 multicast
source address, the value ranges from 0 to 128. The default is 128 in both cases.
incoming-interface: Displays routing entries whose incoming interface is the specified one.
interface-type interface-number: Specifies an interface by its type and number.
register: Represents a registered interface.
outgoing-interface: Displays routing entries whose the outgoing interface is the specified one.
exclude: Displays routing entries whose outgoing interface list excludes the specified interface.
include: Displays routing entries whose outgoing interface list includes the specified interface.
match: Displays routing entries whose outgoing interface list includes only the specified interface.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.

HP 3600 v2 Series Specifications

General

Brand	HP
Model	3600 v2 Series
Category	Switch
Language	English