184
Field Descri
tion
Peer's Address Address of the MSDP peer that sent SA messages.
Number of SA Number of (S, G) entries from this peer.
Number of source and group, counted by
AS
Number of cached (S, G) entries that the AS counted.
AS
AS number. A question mark indicates that the system could not
obtain the AS number.
Number of source Number of multicast sources from this AS.
Number of group Number of multicast groups from this AS.
encap-data-enable
Syntax
encap-data-enable
undo encap-data-enable
View
Public network MSDP view, VPN instance MSDP view
Default level
2: System level
Parameters
None
Description
Use encap-data-enable to enable encapsulation of multicast data in SA messages.
Use undo encap-data-enable to restore the default.
By default, an SA message contains only an (S, G) entry. No multicast data is encapsulated in an SA
message.
Examples
# Enable encapsulation of multicast data in SA messages on the public network.
<Sysname> system-view
[Sysname] msdp
[Sysname-msdp] encap-data-enable
# Enable encapsulation of multicast data in SA messages in VPN instance mvpn.
<Sysname> system-view
[Sysname] msdp vpn-instance mvpn
[Sysname-msdp-mvpn] encap-data-enable
import-source
Syntax
import-source [ acl acl-number ]
To Next Page
Loading...
Need help?
General