HP 3600 v2 Series User Manual

293
IPv6 multicast VLAN configuration commands
(available only on the HP 3600 v2 EI)
display multicast-vlan ipv6
Syntax
display multicast-vlan ipv6 [ vlan-id ] [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
vlan-id: Specifies an IPv6 multicast VLAN, in the range of 1 to 4094. If this argument is not specified, this
command displays information about all IPv6 multicast VLANs.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display multicast-vlan ipv6 to display information about the specified IPv6 multicast VLAN or all IPv6
multicast VLANs.
Examples
# Display information about all IPv6 multicast VLANs.
<Sysname> display multicast-vlan ipv6
Total 2 IPv6 multicast-vlan(s)
IPv6 Multicast vlan 100
subvlan list:
vlan 2 4-6
port list:
no port
IPv6 Multicast vlan 200
subvlan list:
no subvlan
port list:

HP 3600 v2 Series Specifications

General

Brand	HP
Model	3600 v2 Series
Category	Switch
Language	English