HP 3600 v2 Series User Manual

164
<Sysname> system-view
[Sysname] pim vpn-instance mvpn
[Sysname-pim-mvpn] probe-interval 6
prune delay (PIM view)
Syntax
prune delay interval
undo prune delay
View
Public network PIM view, VPN instance PIM view
Default level
2: System level
Parameters
interval: Prune delay time in the range of 1 to 128 seconds.
Description
Use prune delay to configure the prune delay time, namely, the length of time that the device waits
between receiving a prune message and taking a prune action.
Use undo prune delay to restore the default.
By default, the prune delay is not configured.
Examples
# Set the prune delay time to 75 seconds in the public network.
<Sysname> system-view
[Sysname] pim
[Sysname-pim] prune delay 75
# Set the prune delay time to 75 seconds in VPN instance mvpn.
<Sysname> system-view
[Sysname] pim vpn-instance mvpn
[Sysname-pim-mvpn] prune delay 75
register-policy (PIM view)
Syntax
register-policy acl-number
undo register-policy
View
Public network PIM view, VPN instance PIM view
Default level
2: System level

HP 3600 v2 Series Specifications

General

Brand	HP
Model	3600 v2 Series
Category	Switch
Language	English