76
<Sysname> display igmp host port-info vlan 2 group 224.1.1.1
VLAN(ID) : 2
(0.0.0.0, 224.1.1.1)
Port : Ethernet1/0/1
Host Uptime Expires
1.1.1.1 00:02:20 00:00:40
2.2.2.2 00:02:21 00:00:39
Port : Ethernet1/0/2
Host Uptime Expires
3.3.3.3 00:02:20 00:00:40
Table 20 Command output
Field Descri
tion
(0.0.0.0, 224.1.1.1) (S, G) entry, where 0.0.0.0 indicates all multicast sources
Port Member port
Host Host IP address
Uptime Host running duration
Expires Host expiration time, where timeout means that the host has expired
display igmp interface
Syntax
display igmp [ all-instance | vpn-instance vpn-instance-name ] interface [ interface-type
interface-number ] [ verbose ] [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
all-instance: Specifies all VPN instances.
vpn-instance vpn-instance-name: Specifies a VPN, where vpn-instance-name is a case-sensitive string of
1 to 31 characters.
interface-type interface-number: Specifies an interface to display its IGMP configuration and operation
information. If no interface is specified, the command displays the related information of all
IGMP-enabled interfaces.
verbose: Displays the detailed IGMP configuration and operation information.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
To Next Page
Loading...
Need help?
General