243
View
IPv4 MBGP address family view
Default level
2: System level
Parameters
group-name: Specifies an IPv4 MBGP peer group by its name, a string of 1 to 47 characters.
ip-address: Specifies an IPv4 MBGP peer by its IP address.
Description
Use peer next-hop-local to specify the router as the next hop for routes sent to a peer or a peer group.
Use undo peer next-hop-local to remove the configuration.
By default, the routes advertised to an eBGP peer or a peer group take the local router as the next hop,
but the routes outgoing to an iBGP peer or a peer group do not take the local router as the next hop.
Examples
# In IPv4 MBGP address family view, specify the router as the next hop for routes sent to the peer group
test.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] group test internal
[Sysname-bgp] peer test as-number 200
[Sysname-bgp] ipv4-family multicast
[Sysname-bgp-af-mul] peer test enable
[Sysname-bgp-af-mul] peer test next-hop-local
peer preferred-value (MBGP address family view)
Syntax
peer { group-name | ip-address } preferred-value value
undo peer { group-name | ip-address } preferred-value
View
IPv4 MBGP address family view
Default level
2: System level
Parameters
group-name: Specifies an IPv4 MBGP peer group by its name, a string of 1 to 47 characters.
ip-address: Specifies the IP address of an IPv4 MBGP peer.
value: Specifies a preferred value, in the range of 0 to 65535.
Description
Use peer preferred-value to specify a preferred value for routes received from a peer or peer group.
Use undo peer preferred-value to restore the default.
To Next Page
Loading...
Need help?
General