HP 3600 v2 Series User Manual

80
Table 22 Command output
Field Descri
p
tion
Proxying group record(s) information of
VPN-Instance: public net
IGMP proxying group information on the public network.
Total 1 IGMP-Proxying group record(s) One IGMP proxying group is recorded.
Group Address/Group Multicast group address.
Member state
Host member states:
• Delay.
• Idle.
Expires
Remaining time of the multicast group, where "off" means that
the multicast group never times out.
Group mode
Multicast source filtering modes:
• Include.
• Exclude.
Source list
List of multicast sources (only including the sources from which
hosts want to receive multicast data).
display igmp routing-table
Syntax
display igmp [ all-instance | vpn-instance vpn-instance-name ] routing-table [ source-address [ mask
{ mask | mask-length } ] | group-address [ mask { mask | mask-length } ] | flags { act | suc } ] * [ |
{ begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
all-instance: Specifies all VPN instances.
vpn-instance vpn-instance-name: Specifies a VPN, where vpn-instance-name is a case-sensitive string of
1 to 31 characters.
source-address: Multicast source address.
group-address: Multicast group address, in the range of 224.0.1.0 to 239.255.255.255.
mask: Subnet mask of the multicast group address or multicast source address, 255.255.255.255 by
default.
mask-length: Subnet mask length of the multicast group address or multicast source address. For a
multicast source address, this argument has an effective value range of 0 to 32. For a multicast group
address, this argument has an effective value range of 4 to 32. The system default is 32 in both cases.
flags: Specifies the route flag.
act: Displays the IGMP routes with the ACT flag.

HP 3600 v2 Series Specifications

General

Brand	HP
Model	3600 v2 Series
Category	Switch
Language	English