HP 3600 v2 Series User Manual

362
HoldTime: 80
Advertisement Interval: 60
Next advertisement scheduled at: 00:00:48
Table 78 Command output
Field Descri
p
tion
Elected BSR Address IPv6 address of the elected BSR
Candidate BSR Address Address of the candidate BSR
Priority BSR priority
Hash mask length Hash mask length
State BSR state
Scope Scope of the BSR
Uptime Length of time since this BSR was elected
Next BSR message scheduled at Remaining time of this BSR
Candidate RP Address of the C-RP
Priority Priority of the C-RP
HoldTime Timeout time of the C-RP
Advertisement Interval Interval between C-RP-Adv messages
Next BSR message scheduled at
Remaining time before the C-RP will send the next
C-RP-Adv message
display pim ipv6 claimed-route
Syntax
display pim ipv6 claimed-route [ ipv6-source-address ] [ | { begin | exclude | include }
regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
ipv6-source-address: Displays the information of the IPv6 unicast route to a particular IPv6 multicast
source. If you do not provide this argument, this command displays information about all IPv6 unicast
routes that IPv6 PIM uses.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.

HP 3600 v2 Series Specifications

General

Brand	HP
Model	3600 v2 Series
Category	Switch
Language	English