240
peer filter-policy (MBGP address family view)
Syntax
peer { group-name | ip-address } filter-policy acl-number { export | import }
undo peer { group-name | ip-address } filter-policy [ acl-number ] { export | import }
View
IPv4 MBGP address family view
Default level
2: System level
Parameters
group-name: Specifies an IPv4 MBGP peer group by its name, a string of 1 to 47 characters.
ip-address: Specifies the IP address of an IPv4 MBGP peer.
acl-number: Specifies an ACL by its number, in the range of 2000 to 3999.
export: Uses the ACL to filter routes outgoing to the peer or the peer group.
import: Uses the ACL to filter routes incoming from the peer or the peer group.
Description
Use peer filter-policy to configure an ACL-based filter policy for a peer or peer group.
Use undo peer filter-policy to remove the filtering.
By default, no ACL-based filter policy is configured for a peer or a peer group.
Related commands: peer as-path-acl.
Examples
# In IPv4 MBGP address family view, reference ACL 2000 to filter routes sent to the peer group test.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] group test external
[Sysname-bgp] peer test as-number 200
[Sysname-bgp] ipv4-family multicast
[Sysname-bgp-af-mul] peer test enable
[Sysname-bgp-af-mul] peer test filter-policy 2000 export
peer group (MBGP address family view)
Syntax
peer ip-address group group-name
undo peer ip-address group group-name
View
IPv4 MBGP address family view
Default level
2: System level
To Next Page
Loading...
Need help?
General