102
Default level
2: System level
Parameters
interval: Last-member query interval in seconds, in the range of 1 to 5.
Description
Use last-member-query-interval to configure the global IGMP last-member query interval.
Use undo last-member-query-interval to restore the default.
By default, the IGMP last-member query interval is 1 second.
Related commands: display igmp interface, igmp last-member-query-interval, and robust-count.
Examples
# Set the global IGMP last-member interval to 3 seconds on the public network.
<Sysname> system-view
[Sysname] igmp
[Sysname-igmp] last-member-query-interval 3
# Set the global IGMP last-member interval to 3 seconds in VPN instance mvpn.
<Sysname> system-view
[Sysname] igmp vpn-instance mvpn
[Sysname-igmp-mvpn] last-member-query-interval 3
max-response-time (IGMP view)
Syntax
max-response-time interval
undo max-response-time
View
Public network IGMP view, VPN instance IGMP view
Default level
2: System level
Parameters
interval: Maximum response time for IGMP general queries in seconds, in the range of 1 to 25.
Description
Use max-response-time to configure the maximum response time for IGMP general queries globally.
Use undo max-response-time to restore the default.
By default, the maximum response time for IGMP general queries is 10 seconds.
Related commands: display igmp interface, igmp max-response-time, and timer other-querier-present.
Examples
# Set the maximum response time for IGMP general queries to 8 seconds globally on the public network.
<Sysname> system-view
[Sysname] igmp
To Next Page
Loading...
Need help?
General