257
Table 57 Command output
Field Descri
tion
general queries General query messages
specific queries Multicast-address-specific query messages
reports Report messages
dones Done messages
reports with right and wrong records Reports that contain correct and incorrect records
specific sg queries Multicast-address-and-source-specific queries
dot1p-priority (MLD-snooping view)
Syntax
dot1p-priority priority-number
undo dot1p-priority
View
MLD-snooping view
Default level
2: System level
Parameters
priority-number: Specifies an 802.1p precedence for MLD messages, in the range of 0 to 7. A higher
number indicates a higher precedence.
Description
Use dot1p-priority to set the 802.1p precedence for MLD messages globally.
Use undo dot1p-priority to restore the default.
The default 802.1p precedence for MLD messages is 0.
Examples
# Set the 802.1p precedence for MLD messages to 3 globally.
<Sysname> system-view
[Sysname] mld-snooping
[Sysname-mld-snooping] dot1p-priority 3
dscp (MLD-snooping view)
Syntax
dscp dscp-value
undo dscp
View
MLD-snooping view
To Next Page
Loading...
Need help?
General