419
Default level
1: Monitor level
Parameters
ipv6-address: Specifies the IPv6 address of a BGP peer.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display bgp ipv6 multicast peer received ipv6-prefix to display the prefix entries in the ORF
information of the specified BGP peer.
Examples
# Display the prefix information in the ORF packet from the BGP peer 4::4.
<Sysname> display bgp ipv6 multicast peer 4::4 received ipv6-prefix
ORF ipv6-prefix entries: 2
ge: greater-equal le: less-equal
index rule prefix ge le
10 permit 1::/64 80 128
20 deny 100::/64 80 128
Table 93 Command output
Field Descri
tion
ORF ip-prefix entries Number of ORF prefix entries
index Index of a prefix entry
rule Matching rule of the prefix
prefix Prefix information
ge
Greater-equal, which indicates that the mask length must be greater than or
equal to the specific value
le
Less-equal, which indicates that the mask length must be less than or equal to the
specific value
display bgp ipv6 multicast routing-table
Syntax
display bgp ipv6 multicast routing-table [ ipv6-address prefix-length ] [ | { begin | exclude | include }
regular-expression ]
View
Any view
To Next Page
Loading...
Need help?
General