368
Examples
# Display the detailed IPv6 PIM information on Vlan-interface1.
<Sysname> display pim ipv6 interface vlan-interface 1 verbose
Interface: Vlan-interface1, FE80::200:5EFF:FE04:8700
PIM version: 2
PIM mode: Sparse
PIM DR: FE80::200:AFF:FE01:101
PIM DR Priority (configured): 1
PIM neighbor count: 1
PIM hello interval: 30 s
PIM LAN delay (negotiated): 500 ms
PIM LAN delay (configured): 500 ms
PIM override interval (negotiated): 2500 ms
PIM override interval (configured): 2500 ms
PIM neighbor tracking (negotiated): disabled
PIM neighbor tracking (configured): disabled
PIM generation ID: 0xF5712241
PIM require generation ID: disabled
PIM hello hold interval: 105 s
PIM assert hold interval: 180 s
PIM triggered hello delay: 5 s
PIM J/P interval: 60 s
PIM J/P hold interval: 210 s
PIM BSR domain border: disabled
Number of routers on network not using DR priority: 0
Number of routers on network not using LAN delay: 0
Number of routers on network not using neighbor tracking: 2
Table 83 Command output
Field Descri
tion
Interface
Interface name and its IPv6 address
PIM version
IPv6 PIM version
PIM mode
IPv6 PIM mode, dense or sparse
PIM DR IPv6 address of the DR
PIM DR Priority (configured)
Priority for DR election
PIM neighbor count Total number of IPv6 PIM neighbors
PIM hello interval Interval between IPv6 PIM hello messages
PIM LAN delay (negotiated) Negotiated prune message delay
PIM LAN delay (configured) Configured prune message delay
PIM override interval (negotiated) Negotiated prune override interval
PIM override interval (configured) Configured prune override interval
PIM neighbor tracking (negotiated)
Negotiated neighbor tracking status
(enabled/disabled)
To Next Page
Loading...
Need help?
General