HP 3600 v2 Series User Manual

140
match: Displays PIM routing entries, where the outgoing interface list includes only the specified
interface.
mode mode-type: Specifies a PIM mode, where mode-type can have the following values:
• dm: Specifies PIM-DM.
• sm: Specifies PIM-SM.
• ssm: Specifies PIM-SSM.
flags flag-value: Displays PIM routing entries that contains the specified flags. The values of flag-value
and their meanings are as follows:
• 2msdp: Specifies PIM routing entries to be contained in the next SA message to notify an MSDP
peer.
• act: Specifies PIM routing entries that have been used for routing data.
• bidir: Specifies PIM routing entries created by BIDIR-PIM.
• del: Specifies PIM routing entries scheduled to be deleted.
• exprune: Specifies PIM routing entries that contain outgoing interfaces pruned by other multicast
routing protocols.
• ext: Specifies PIM routing entries that contain outgoing interfaces provided by other multicast
routing protocols.
• loc: Specifies PIM routing entries on the devices that directly connect to the same subnet as the
multicast source.
• msdp: Specifies PIM routing entries obtained from MSDP SA messages.
• niif: Specifies PIM routing entries that contain unknown incoming interfaces.
• nonbr: Specifies PIM routing entries with PIM neighbor searching failure.
• rpt: Specifies PIM routing entries on RPT branches where (S, G) prunes have been sent to the RP.
• rq: Specifies PIM routing entries of the receiving side of the switch-MDT switchover.
• spt: Specifies PIM routing entries on the SPT.
• sq: Specifies PIM routing entries of the originator side of switch-MDT switchover.
• swt: Specifies PIM routing entries in the process of RPT-to-SPT switchover.
• wc: Specifies wildcard routing entries.
fsm
: Displays the information of the state machine.
|: F
ilters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display pim routing-table to display PIM routing table information.
If neither all-instance nor vpn-instance is specified, this command displays information about PIM routing
tables in the public network.
Related commands: display multicast routing-table.

HP 3600 v2 Series Specifications

General

Brand	HP
Model	3600 v2 Series
Category	Switch
Language	English