HP 3600 v2 Series User Manual

376
Default level
1: Monitor level
Parameters
ipv6-group-address: Specifies an IPv6 multicast group by its address, in the range of FFxy::/16
(excluding FFx0::/16, FFx1::/16, FFx2::/16 and FF0y::), where x and y represent any hexadecimal
number between 0 and F, inclusive. If you do not provide a group address, this command displays
information about the RPs that corresponds to all IPv6 multicast groups.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display pim ipv6 rp-info to display RP information.
The RP information includes the information of RPs dynamically found by the BSR mechanism and static
RPs.
Examples
# Display the RP information that corresponds to the IPv6 multicast group FF0E::101.
<Sysname> display pim ipv6 rp-info ff0e::101
PIM-SM BSR RP information:
prefix/prefix length: FF0E::101/64 [B]
RP: 2004::2
Priority: 192
HoldTime: 130
Uptime: 00:05:19
Expires: 00:02:11
Table 87 Command output
Field Descri
p
tion
prefix/prefix length IPv6 multicast group to which the RP is designated.
[B]
RP provides services for multicast groups in the IPv6
bidirectional PIM mode. Without this field displayed, the RP
provides services for multicast groups in the IPv6 PIM-SM
mode.
RP IPv6 address of the RP.
Priority RP priority.
HoldTime Timeout time of the RP.
Uptime Length of time since the RP was elected.
Expires Remaining time of the RP.

HP 3600 v2 Series Specifications

General

Brand	HP
Model	3600 v2 Series
Category	Switch
Language	English