EasyManuals Logo
Home>HP>Switch>3600 v2 Series

HP 3600 v2 Series User Manual

HP 3600 v2 Series
479 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #46 background imageLoading...
Page #46 background image
33
undo mac-address [ multicast ] mac-address vlan vlan-id
In port group view:
mac-address multicast mac-address vlan vlan-id
undo mac-address multicast mac-address vlan vlan-id
View
System view, Ethernet interface view, Layer 2 aggregate interface view, port group view
Default level
2: System level
Parameters
mac-address: Specifies a static multicast MAC address, which can be any multicast MAC address except
0100-5Exx-xxxx and 3333-xxxx-xxxx, where x represents an arbitrary hexadecimal number from 0 to F.
A multicast MAC address is a MAC address whose the least significant bit of the most significant octet
is 1. The system gives a prompt if the configured static multicast MAC address conflicts with the MAC
address of other protocols.
interface-list: Specifies a list of interfaces. You can specify up to n single interfaces, interface ranges, or
combinations of both for the list. A single interface takes the form of interface-type interface-number. An
interface range takes the form of interface-type interface-number to interface-type interface-number,
where the end interface number must be greater than the start interface number.
vlan vlan-id: Specifies the VLAN to which the interface belongs. vlan-id is in the range of 1 to 4094. The
specified VLAN must exist and the system gives a prompt if the specified interface does not belong to the
VLAN.
Description
Use mac-address multicast to configure a static multicast MAC address entry.
Use undo mac-address multicast to delete a static multicast MAC address entry.
By default, no static multicast MAC address entry is configured.
If multicast is not specified when using the undo mac-address multicast command, all MAC address
entries (including static multicast MAC address entries and unicast MAC address entries) are deleted.
Related commands: display mac-address multicast; mac-address (Layer 2—LAN Switching Command
Reference).
Examples
# Configure a static multicast MAC address entry with the MAC address of 0100-0001-0001 and
outgoing interfaces Ethernet 1/0/1 through Ethernet 1/0/5 in VLAN 2.
<Sysname> system-view
[Sysname] mac-address multicast 0100-0001-0001 interface ethernet 1/0/1 to ethernet 1/0/5
vlan 2
# Configure a static multicast MAC address entry with the MAC address of 0100-0001-0001 in interface
view of Ethernet 1/0/1 in VLAN 2.
<Sysname> system-view
[Sysname] interface ethernet 1/0/1
[Sysname-Ethernet1/0/1] mac-address multicast 0100-0001-0001 vlan 2

Table of Contents

Other manuals for HP 3600 v2 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP 3600 v2 Series and is the answer not in the manual?

HP 3600 v2 Series Specifications

General IconGeneral
BrandHP
Model3600 v2 Series
CategorySwitch
LanguageEnglish

Related product manuals