Default Setting (System Menu)
8-44 OPERATION GUIDE
Printer Settings
Printing from computers, settings are generally made on the application software screen. However, the following
settings are available for configuring the defaults to customize the machine.
• Emulation …8-44
• Color Setting …8-45
• EcoPrint …8-46
• Override A4/Letter …8-46
• Duplex …8-47
• Copies …8-47
• Orientation …8-48
• Form Feed Timeout …8-48
• LF Action …8-49
• CR Action …8-49
• Paper Feed Mode …8-50
NOTE: If user login administration is enabled, you can only change the settings by logging in with
administrator privileges.
Emulation
Select the emulation for operating this machine by commands oriented to other types of printers.
Selection of emulation
The printer can emulate PCL 6, KPDL and KPDL(Auto).
Use the procedure below to select the emulation.
1 Press the System Menu Key.
2 Press [Printer] > [Change] of Emulation.
3 Select the desired emulation.
NOTE: If you selected [KPDL(Auto)], set Alternative
Emulation, too. (Refer to page 8-44)
When you have selected [KPDL] or [KPDL(Auto)], set
KPDL Error Report, too. (Refer to page 8-45)
4 Press [OK].
Setting of Alternative Emulation
When you have selected [KPDL(Auto)] as emulation mode, you can switch between KPDL and another
emulation mode (alternative emulation) automatically according to the data to print. The alternative emulation
you can set is [PCL6].
To Next Page
Loading...
Need help?
General
