Default Setting (System Menu)
OPERATION GUIDE 8-87
8
System Initialization
Initialize the hard disk mounted on the machine to return to the default mode.
CAUTION: System initialization will erase Custom Document Boxes, data stored in Document Box, addresses
in the Address Book, user property, account information, and settings.
NOTE: This item will not be displayed if the optional Data Security Kit is installed. Refer to the Data Security
Kit (E) OPERATION GUIDE on the bundled CD-ROM about the functions added when the Data Security Kit is
installed and related procedures.
Using KM-NET VIEWER allows you to backup addresses in the Address Book.
1 Press the System Menu key.
2 Press [ ], [Adjustment/Maintenance] and then
[Execute] of System Initialization.
3 If user login administration is disabled, the user
authentication screen appears. Enter your login
user name and password and then press [Login].
For this, you need to login with administrator
privileges. Refer to Adding a User on page 11-4 for
the default login user name and password.
4 When the confirmation screen appears, press
[Yes].
Initialization starts.
IMPORTANT: The Formatting... Do not turn off the
main power switch message appears during
initialization. Wait until initialization ends.
5 Once the initialization ends, the message Task is
completed. Turn the main power switch off and on.
appears. Turn the main power switch off.
To Next Page
Loading...
Need help?
General
